Guide to label types

While the immediate thought when mentioning labels is the self adhesive product presented on a reel, there are other styles of label. And these can be printed on a conventional sheetfed press, though this is unlikely to be by a commercial printer.

The wet glued label is the traditional form of label and continues to be used where high volumes are required. This includes mainstream beer bottles, tinned fruit and vegetables and, of course, soup and bottled water. At one time most spirits labels were printed in this way: litho sheets on very lightweight paper that is embellished with silver or gold on a dedicated bronzing machine. 

If you ever saw one in action, you would know why these fell from favour even before the costs of engraving gravure cylinders could be considered. This was a process for the longest of long runs.

Today silver and to some extent gold are provided for beer bottle labels either by printing on metallised papers or by applying an inline cold foil and over printing on the following print units. Again it is a process for long print runs and unlikely to appeal to a printer breaking into the labels sector. 

Other styles of wet glue labels, so called because the glue is applied at the point of attachment, have equally long runs. For the brand owner the cost per label is lower than a pressure sensitive label, but handling equipment is more expensive. Wet glue labels are supplied in stacks, needing each to feed without problems against the glued surface of a tin can.

The printer equally needs more specialist equipment. Colour fidelity and consistency is absolutely crucial. Cutting on a guillotine has to be micron precise. Jogging and sheet handling are critical steps, and frequently machines do this better than manual labour. Alternately shaped labels (for the collar of a drink bottle for example) need to be punched accurately. 

The conventional sheetfed press can also be used for in-mould labelling where the printed label is laminated to a sheet of plastic that is then formed under heat and pressure into a tub for a dairy product, most recognisably an ice cream or margarine tub. Other FMCG or plastic products can also take this type of label. 

As with a paper label, the material is very thin so careful handling is needed. The great advantage is that it become part of the product and there is no risk of scuffing or damage in the filling, distribution and sales process.

Both Heidelberg and Koenig & Bauer believe there is large scope for this class of label product in the future. But it is not a simple diversification for a commercial printer.