Folio is thinking smart for finishing

Folio used to be a standard trade finisher, at the mercy of the printers it supplied. Now it has used the pandemic period to refocus the business in ways that promise a stronger future.

Andy Bird has known plenty of ups and downs in the 32 years since Folio Print Finishing was first founded. At that time trade finishing was typified by fold, stitch and trim with the finisher always under pressure to perform gymnastics to complete and deliver jobs that arrived late and needed to be out on time. The company could not afford to be too picky about who it worked with and when it worked. Customers came first.

Today, at the end of the lockdown, Folio is busy again, but it is not a return to that sort of business. “Lockdown allowed us to stop chasing our tails and has given us the opportunity and confidence to say ‘No’ to jobs,” Bird says. 

The company did not close during the pandemic period, and, says Bird, stayed busy all the way through, albeit with some staff on furlough. But it did move premises, adding to the stress caused by the lockdowns. Combined, the events gave Bird and Richard Hughes, who joined the business as managing director in 2019, the chance to really look at the trade finishing business and assess where it was going. In short, Folio changed the rules so that instead of being exploited by its customers, there would be clear parameters about what printers can expect and what is expected of them. 

“We have reduced our operating hours, which relieves demand on the already crowded car park, and we have the confidence to say ‘This is what we do, this is what we charge’. Take it or leave it. 

“It is impossible to offer the best quality, the fastest turnaround at the cheapest price. People have to pay for that sort of service,” he says.

“We are at the end of the line while printers want to keep all parts of a job in house and they will price the job so that all the added value is in the print element and will virtually give away the finishing, so when they come to us because they can’t handle the finishing element, they will say ‘that’s all the money that’s in the job for finishing’.  

“But we have to make money too and I’m fed up of working as hard as we used to do and providing a service and not getting the returns to enable us to reward the staff that we have here.

“We know we can’t be all things to all men.”

The lockdown, by providing a break to the normal routine, has allowed the business to take proper stock of where it is and the accumulated bad habits caused by keeping the corporate nose close to the grindstone. There was furlough and there were staff that left the business, six choosing to work for recycling businesses or in the delivery sector.

This provided Bird and Hughes with the incentive to look at the skills base and how the business operated. Training has ensured that attachment to one piece of equipment or one area of the business is broken. This was not without its teething issues, but on the other hand, says Bird, there is a much better working environment, better morale and a greater team commitment to the business. “We had to decide what was best for the business,” says Bird. “We are now stronger and less management time is spent on personnel issues. Staff communications and procedures are better. We are ready to come out of it.” 

The nature of that work is changing too. The company has the traditional fold, stitch and trim associated with trade finishing services which is bolstered by two perfect binding lines, but it also offers short run booklet making through a Duplo DBM600, and an increasing volume of packaging work. There is a Heidelberg Varimatrix B1 die cutter/creaser, two Cylinders, three hand fed platens, a Moll folder gluer and a recently arrived Duplo B2+ Blade cutting table. It’s a service for short runs, for samples and prototyping, working with design agencies, digital printers and commercial printers feeling their way into carton printing. The company has its own die making resource.

The reorganisation means, says Bird, “that we no longer have to run the binder continuously. It does not matter if it is not running, staff will be busy elsewhere all the time and other parts of the operation are more profitable. We are not chasing turnover.”

The move to Avonmouth has also provided room to make these sorts of changes. The technology is housed in a vast space under a single roof, with a mezzanine area added for the ultra short run work and for storage. 

Hughes points out that Avonmouth is a vibrant area with numerous industrial and commercial businesses that could become customers for Folio. Conversations have opened up with local design businesses around the possibilities of packaging design.

“We decided what was best for the business. Some people kicked back (we knew some would be a problem), others were set in their ways and things ran their normal course. I appreciate now the impacts of this on management time. We’re not there yet, but the building blocks are moving into place.

“We get visibility over the work that is coming in and if the binder doesn’t run all the time, we are not bothered,” says Bird. “And the other products will be more profitable. If our staff are busy throughout their 12 hour shift, we know we are getting a return because costs are covered.”

Staff numbers have dropped from around 50 to 42, now split into two shifts, working three 12-hour days to give six days a week cover. “It’s now a standard 72-hour week,” says Hughes, “where we guarantee work on a Saturday and customers are getting used to the fact that we are here on Saturdays too, when previously it was overtime.” The change is also appreciated by staff, who are able to organise something else for the down days if wanted. 

The greater structure means, too, that equipment can be looked after better with scheduled maintenance possible “because we are no longer fire fighting production problems, no longer fire fighting personnel problems” . That too means an uplift for staff morale. “People are happier that the machines are being maintained,” says Hughes. “The whole place is getting better and more professional.”

Bird reckons too that the pandemic has given other printers time to reflect on their businesses and how they want to go forwards. Many have cut staff numbers and realised that the finishing assets they had bought to retain work in house, were under used and costing money. Consequently, the trade finisher gets more work, particularly where there is an element beyond the ordinary or with a degree of difficulty. The print finishing role at many print companies has been reduced to operation through a touch screen and has been deskilled. 

“We have always had the reputation for taking on the weirdest jobs,” says Bird. “This is fun providing you get the right price for it. And we have revisited pricing.”

Packaging is the growth opportunity. The company chose to install the Blade, partly because it needed a device to cut corrugated for its own packing boxes and partly from its experience of the Duplo booklet maker. This was installed three years ago, raising eyebrows at the time given the amount of Muller Martini equipment Folio has bought over the years. It proved a shrewd purchase with more than 12 million products and counting, produced since then.

“We need the Blade to do packaging prototypes and samples without having to make dies, we just take a file, feed it to the Blade and cut it out,” says Bird.

This applies to the company’s own requirement for packing boxes. Instead of everything being supplied in an A4 carton, perhaps with fill to hold it steady, Folio can cut out and make boxes to match the job and prevent work sliding around and becoming damaged. It will also reduce overall transport costs because the smaller boxes can be loaded into a van more efficiently.

It was therefore imperative that the chosen cutting table could handle corrugated board as well as standard folding cartons for boxes and folders.

“The Blade is key to some of the changes we are making, with growth on the packaging side,” says Bird. “The Blade will let us do more prototypes and samples without the need to make a die because we can take a file and cut out the job, including delivery cartons. That has always been a bug bear of mine.”

The experience with DBM 600 has provided a taste for shorter runs as well as confidence in Duplo as a supplier. Subsequently, what Folio is doing amounts to a series of changes that are in line with the times: shorter runs, sharper focus, greater transparency and headroom for growth, whichever way the market moves.