W&G Baird is first to add Heidelberg robots

The Belfast printer has ordered two P Stackers to load from its folding machines and will be the first in the UK with the technology.

W&G Baird will be the first UK company to install Heidelberg’s P Stacker robotic loader technology, kicking off a number of placements for the productivity enhancing equipment.

The two P Stackers at the Belfast factory will be located at the end of the company’s two Stahl TX96 folders, eliminating the need for someone to remove sections from the delivery and place the stacks on a pallet. Now the task will be handled by the robotic arm, leaving the operator free to manage other tasks. In some locations the operator is running two folders, delivering 30,000 sections or more an hour.

W&G Baird is making no outlandish  predictions about the ultimate impact of the investment. “We expect to see at least a 10% improvement in output thanks to this investment,” says operations director Andrew Watson. “We also expect to see our run speeds increase as most of the physical element of the job will now be handled by the robot.”

The speed of the arm and level of automation means that the P Stacker has to be at the centre of a safety cage, unlike the similar CoBo stack from Komori MBO. This is a collaborative robot, helping a human operator rather than replacing the need for an operator, as the P Stacker does.

The arrangement and size of the piles will depend on the size and format of each signature as well as the next step in the process. The single gripper arm will cope with formats from 120x120mm to 330x330mm. A signature destined for perfect binding will lay flatter than a 32pp signature, say, for a saddle stitcher. 

And while the most interest will be for longer runs, the arm can load two sections on a pallet for shorter runs, saving floor space compared to storing folded signatures as one section per pallet. The stack of folded signatures will be presented in the right orientation for perfect binding or stitching and cleanly enough to reduce feeding issues on the finishing line.

Ian Trengrouse, product manager post press commercial at Heidelberg UK, adds: “Heidelberg has always developed the next step in pushing the boundaries in folder technology. From buckle plate and folding roller automation, the PFX feeder, to shingling of sheets throughout the individual folding unit, Push to Stop technology and more incorporated into the Stahlfolder, the P Stacker is the next step in this progression and the perfect partner to the Stahlfolder P series of machines.

“The highest level of productivity is easily handled by the P Stacker, leaving the operator to concentrate on other tasks. This could even be a second machine; we already have users running in excess of 30,000 folded sections per hour across two machines with only one operator manning both machines. This level of productivity is ground breaking and truly impressive to see.”

It will be visible elsewhere in the UK with the next units heading to a magazine printer and then subsequently to a printer with a more diverse range of work. 

The intention had been to show off the P Stacker during Drupa in 2020, where the demonstration would also have included automated pallet trucks moving a stack of paper to the folder and then moving the folded signatures to the next device.

Watson has been keeping tabs on such developments. “We have been closely following the developments of robotics in folding machines, so when Heidelberg brought the P Stacker to market it was an obvious step to make, to improve productivity in our bindery department, as we have with printing over the past five to six years.”