The latest press from the Italian flexible packaging press provider is designed to tackle the trend for shorter runs and shorter supply chains.
Uteco has introduced a new flexo press aimed at short run packaging applications. The Onyx Go CI flexo press comes in three widths and is capable of up to 50 million square metres a year running at 400m/min.
The press was launched at the K packaging and converting show in Dusseldorf, with the claim that the press is “the best for short run ever!”. A full plate change can be carried out in just three minutes and only 18 metres of material is lost at start up, amounting to a time saving of 55% over its best performing rival says Uteco. This amounts to 240 additional hours of production capacity a year, saving of up up 24km of material according to the job mix.
Those jobs cover the range of possibilities for flexo, printing on plastic films, aluminium, paper, laminates and cardboards with either water or solvent based inks. There are adaption kits for printers wanting to run water based inks, for those running aluminium foils and for those running heavier papers and boards.
The company has also managed to shrink the press into a 50m2 footprint, measuring 10×5 metres and is 4 metres high. The side frames are solid to absorb vibrations and sound keeping the noise level to around that of a domestic vacuum cleaner.
The press design splits the reel handling and print/drying section from the control console. This is dominated by an vast iPad style touch screen, reminiscent perhaps of the control console seen on the Landa concept machines at Drupa 2012.
The overall design of the high tech control block slots into the print and materials handling unit. This immediately sets the Onyx Go apart from any other press on the market.
It sets the scene for developments that are geared to minimising makeready, waste and environmental impact. A system automatically scans the flexo plate and uses these measurements to automate setting for the inking and drying systems. Pressure settings and registration are also automated to achieve what it claims is an instantaneous start up and reduces start up waste to 18 metres of substrate.
The drying technology is adjusted according to the ink applied at each plate and chosen press speed. Uteco reckons this will result in a 50% reduction in energy consumption needed for drying. Likewise the inking system is controlled to pump only ink needed according to profile of each plate. The ink tanks are positioned to keep ink in the pipework to a minimum. A lightweight doctor blade reduces wear and prolongs the life of the blade. Wash up takes three minutes and reduces solvent consumption by 40% says the company.
The development closes the gap between mainstream flexo and digital printing, where Uteco has a joint venture with Kodak for the Sapphire and Sapphire Evo.