Many digital presses can print long sheets, but finishing has lagged. Now there are solutions that deliver the finish needed.
Sometimes it can be useful to start at the finish and work towards the beginning. If producing perfect bound books, for example, the requirements of finishing will inform the imposition to be used.
At other times the drive to add features and functionality, to do what other companies cannot do or simply to catch up with them, can result in one process becoming out of step with another.
The ability to print a long sheet, banner length in some instances, is a much touted feature of many of the latest generation of cut sheet toner presses. Almost all will print to around 750-800mm and can duplex this length of sheet.
Some can print 1,200-1,300mm albeit without duplexing. This is fine for banners or perhaps personalised height charts to measure a child’s growth, but long sheet printing may be ahead of the next process in the chain. Finishing a long sheet using digitally focused equipment may be problematic.
Let us start therefore at the end.
The potential of different formats that can use large sheet functionality can be seen in the growth of A4 landscape brochures. It may not require the long sheet printing capacity, but does require more from the finishing devices, principally the booklet makers.
The landscape A4 has become the standard format in the property market because the full almost 600mm spread can deliver images with more impact, especially when tied in with spot varnish over these images. Likewise the landscape format when used in a case bound book is ideal for impressive pitch documents and photobooks. It gains too from being a non standard format in a sea of portrait A4 publications.
With the additional length that is is possible to print, press suppliers will also explain that the longer sheet is perfect for book covers, enabling the printer to print a jacket to fit across the spine and with flaps to tuck in. The format allows a flap to open on an otherwise standard A4 brochure, to great effect. They may demonstrate printing on the full length of the sheet with artwork designed to have a concertina fold, again with the impact on the end consumer in mind.
However, it seems nobody asked the trade finishing company if they could handle a sheet of the full 1,300mm length. Manual creasing and folding worked but again nobody wants this. Others have adapted older technology to handle extra large formats. This is not within the scope of most commercial printers. Now at last finishing solutions suited to digital printing are becoming available.
A4 landscape stitching is no longer the preserve of high end lines. Machines from the booklet maker class, like Duplo‘s 600, Horizon’s SPF200L and Plockmatic’s BM5000, can deliver products in this format. Previous issues about feeding and control of a sheet fed on the short edge have been tackled.
Morgana has gone a step further with the ability to produce 300mm square brochures using its PowerSquare binding. These machines will take the sheets, printed offline or inline, folding collating, stitching and creating a spine for a perfect bound look and a product that stacks well. In addition, the PS160 accepts a sheet to a maximum of 370x620mm giving that 300x300mm format with a cover to 400gsm maximum. It is well beyond a standard A4 with an impact to match.
Perfect binding and layflat binding in particular can elevate the non standard format book. The large format layflat format is suited to high end photobooks, either limp bound or case bound. Traditionally litho prints have been needed, or those printed on a B2 digital press. But long sheet print is changing that.
Long sheets are not restricted to brochures and leaflets. The Horizon CRF362 creaser folder can handle a sheet up to 850mm, the general limit for double-sided single pass printing and available on machines from light production presses to the Kodak Nexpress.
“This is enough to do 8pp of A4 as a cover for lots of smaller pagination stitched products,” says IFS technical sales director Jason Seaber. And that is the direction that the sector is moving. He explains: “Customers do not want a single 64pp catalogue any longer. Instead they will want a number of 8pp,12pp or 16pp more targeted publications. A open out 6pp or 8pp cover can be very effective.”
The device can put in ten crease lines across the sheet, using a touch screen to set up a job or to have one recalled from memory. It has the ability to set six fold patterns with the option of cross perforating.
As well as covers, menus, greetings cards, tent cards are meat and drink. “It is popular for commercial printers, especially those with the latest Canon and Ricoh machines with the long sheet capability,” he says.
Horizon’s SmartSlitter is currently limited to a sheet length of 670mm, so has limited appeal to companies with the long sheet presses wanting to make us of that functionality.
IFS has other equipment that can cope with a longer than standard digitally printed sheet. The Foliant can laminate a sheet that is up to 1 metre long, says Seaber. The CRF crease and fold capability can be used on a laminated sheet, particularly for menus.
One issue any finishing system faces when handling long sheets is the simple one of how to feed these. The conventional feeder fitted will cope with standard format sheets, but can struggle with a pile of sheets that being two or three times longer than the normal will be that much heavier. The presses have a solution in the BDT Tornado feeder as an option for Canon, Ricoh and Kodak presses. The technology uses a small tracked head to pick up sheets and advance them into the press. Side jets blow air to help separate the sheets.
The same module would be equally suitable for finishing devices, though none has yet declared their hand. This means using an extended table with a limited pile or hand feeding sheets, at least for the moment.
Duplo is renowned for its multifinisher devices and these can handle a long sheet, on occasion up to 1,300mm banner length. Even the most basic model, the DC516, will run a sheet as long as 1,600mm and will run two functions. This is a mechanical system, lacking the sophisticated set up on the remainder of the portfolio, so suited to longer runs or frequent repeat jobs where the artwork changes, but not the format. A typical example, says Duplo showroom manager Neil Scott, is the greetings card. The printer with the long sheet machine can print double the number of cards for less than double the click rate, specifics set between press provider and customer.
The DC618, now the entry level to the multifinisher family, offers three concurrent functions and can handle a sheet to 1,200×330.5mm and up to 400gsm. This is coming close to banner length prints. This model is the most recent addition and is the first to handle the 400gsm coated or uncoated lightweight boards.
The DC646 and DC746 models (with four and five concurrent functions respectively) can as yet cope only with substrates to 350gsm. These are also restricted to 999.1mm long sheets, below the banner length but longer than sheets that can be duplexed. Side air blowers help with the separation of the paper being fed.
The functions offered include slit and crease, cross cut and on the DC746, two sets of perforation. Thus as well as covers that go beyond the A4 format, it can produce direct mail pieces beyond those that can be created out of the standard paper and print formats.
When one of the digital press providers wanted to show off its long sheet print capability, it printed a concertina fold project but, says Scott, could find no finisher able to take on the job with conventional equipment. Eventually Duplo‘s showroom was able to deliver what was necessary.
This highlights an issue that is perhaps holding back the full use of long sheet printing: the facilities for finishing are limited. The majority of trade finishers will gear up for fast turnaround on fold stitch trim, conventional saddle stitching and perfect binding. Some will offer established value add processes like spot varnish and block foiling. This type of equipment is aimed at digital printers. “Most finishing houses don’t have the capability of finishing long sheets, and if you want to cut the long banner sheet across you need a very large guillotine,” says Scott. This is out of kilter with the limited format work that digital print specialises in.
“As more presses with the long sheet ability are installed, this may change although it will be slow because printers struggle to finish it. But once the design agencies are shown the long sheet they love and and start to imagine all kinds of possibilities. It is something new to talk about.”
In turn this will start to drive use of the long sheet capability for the multifinishers. He adds: “Now they can print long sheets and we have the equipment to finish them, it’s opening the possibilities to more and more people.”